Wander makes it easy for you to work remotely from our state-of-the-art workstations. Please note these desk setups are only compatible with modern laptops that have a Thunderbolt port.

For a quick overview of the workstations, check out the video here.

Caldigit Dock

This will be the only cable you will need to utilize all of the desk equipment.

How to Use: The Caldigit will be located under the desk in the metal box and will have a singular USB C Thunderbolt Cable coming up to the top of the desk.

Potential Issues: Some computers may not be able to use the lighting USB due to basic computer differences but most will have an available port. If some desk equipment is not working, it may be as simple as a loose or unplugged wire from the Caldigit.

For laptops without Thunderbolt ports, feel free to bring an HDMI cable you can plug in your computer port into the back of the workstation monitor.

Logitech Brio Webcam

How to Connect: Webcam should automatically connect to your device via the thunderbolt cable. You may need to select the Logitech Brio Web Camera in the setting of the application you want to use. Usually, devices will default to the computer's webcam.

Potential Issues: If the camera does not have a picture, the camera cover may still be on. Simply flip up the piece covering the camera.

Monitor

How to Connect: Your computer will connect to the monitor via the single thunderbolt cable coming from the Caldigit.

Potential Issues: If the computer display is not showing, one solution may be that the wrong input is selected. To change the input, press the button on the bottom side of the monitor and a menu will appear. In that menu, go to input and select the display port. This should bring you to the correct display.

Another issue may be that the display port cable has been unplugged. Check to make sure that the cable is correctly connected to the back of the monitor and also correctly connected to the Caldigit.

Desk

How to Use: Use the arrow keys on the controller, which is mounted to the underside of the desk.

How to Reset: Hold the DOWN button until the desk reaches its lowest height and then release the button (for the Advanced Paddle Keypad, hold the paddle down).

Pro tip: If your desk doesn't start to move after pressing the DOWN button, release the DOWN button and try again. Hold the DOWN button again for 30 seconds and then release (Note: if you have an Advanced Keypad it will display "ASR"; the Basic 2-Button Keypad does not have a display; the Advanced Paddle Keypad will display "RESET").

Hold the DOWN button again until the desk lowers slightly, then rises slightly, then release the button. If the desk doesn't move, try this step again. The movement means the desk reset was successful. If it didn't move, try the quick reset again.

Stowe Woods

Check-in unavailable on web

Good to know